SIKORA FIBER Series 6000

Measurement of diameter, temperature and tension of optical fibres and lump detection in the draw tower

Manufacturer
SIKORA

SIKORA FIBER Series 6000 is a series of measuring heads for continuous quality control of optical fibres directly in the draw tower: diameter of bare and coated fibre, airlines, coating concentricity, fibre temperature, lumps and neckdowns, and fibre tension.

Benefits

  • Measurement of the diameter of bare and coated optical fibres directly in the draw tower (FIBER LASER 6003)
  • Accuracy ±0.05 µm, repeatability 0.02 µm, 2,500 measurements/s
  • Diffraction analysis without moving parts – no calibration required
  • Measurement of fibre diameter, position, tension, vibration frequency and spin
  • Detection of airlines from a diameter of 0.5 µm (FIBER LASER 6003 AIRLINE)
  • Evaluation of coating concentricity (FIBER LASER 6003 CCE)
  • Measurement of fibre temperature at both the cold and hot end (FIBER TEMP 6003)
  • Detection of lumps and neckdowns from a height of 5 µm using dual-sensor technology, 6-axis detection around the entire circumference of the fibre (FIBER LUMP 6003 MICRO)
  • Tension measurement based on the birefringence principle at frequencies of up to 50 kHz (FIBER TENSION 6003)
  • Easy integration of lump detectors into new and existing draw towers
Applications:
  • Optical fibres – bare and coated
  • Draw towers for optical fibre production
  • Optical fibres for premium optical cables

We supply the equipment configured for your application. In your inquiry, please state the material processed, the required throughput and the line parameters – we will prepare a tailored quotation.

Go to inquiry

Need help choosing? Call us on +420 571 647 228 or write to info@azurr-tech.cz.

Technical data

Fibre diameter50–500 µm (FIBER LASER 6003); 100–500 µm (FIBER TEMP 6003, FIBER LUMP 6003 / 6003 MICRO)
FIBER LASER 6003 – accuracy / repeatability±0.05 µm / 0.02 µm
FIBER LASER 6003 – measuring frequency2 500/s
FIBER LASER 6003 AIRLINEsmallest detectable airline 0.5 µm (diameter), measuring frequency 700 Hz
FIBER TEMP 6003 – temperature rangecold end 40–120 °C, hot end 500–1,500 °C
FIBER TEMP 6003 – accuracy / measuring frequency1 °C (cold end) / 100/s
FIBER LUMP 6003 / 6003 MICRO – min. defect height5 µm
FIBER LUMP 6003 / 6003 MICRO – min. defect length500 µm / 50 µm
FIBER LUMP – speed range1–3,000 m/min
FIBER TENSION 6003 – tension range20–400 g (standard telecommunication fibres), repeatability ±0.1 g
FIBER TENSION 6003 – measuring frequency / power supplyup to 50 kHz / PoE+ (Power over Ethernet) 24 V DC ±10 %
Power supply (FIBER LASER, TEMP, LUMP)100–240 V AC ±10 %, 50/60 Hz

Description

The SIKORA FIBER Series 6000 is used for continuous quality control in the production of optical fibres, which must reliably transmit large volumes of data over long distances without loss. The individual measuring heads are installed directly in the draw tower and cover diameter measurement, defect detection, and measurement of fibre temperature and tension.

FIBER LASER 6003 measures the diameter of bare and coated optical fibres on the principle of diffraction analysis – without contact, optically, without moving parts and without the need for calibration. It achieves an accuracy of ±0.05 µm with a repeatability of 0.02 µm and 2,500 measurements per second. The FIBER LASER 6003 AIRLINE variant, usually installed upstream of the coating stage, also detects airlines (air voids in the fibre) from a diameter of 0.5 µm; it is factory-calibrated and retains its absolute accuracy throughout its service life. FIBER LASER 6003 CCE (Coating Concentricity Evaluation) is installed downstream of the coating cup, evaluates both coating concentricity and diameter, and thus replaces a separate measuring head for the diameter of the coated fibre.

FIBER TEMP 6003 is a stand-alone unit for measuring fibre temperature during drawing, installed at the cold end (40–120 °C) or hot end (500–1,500 °C). Measurement at the hot end provides an important parameter for furnace control; at the cold end it allows the fibre temperature before coating to be set and stabilized optimally and the need for helium cooling to be reduced to a minimum. The FIBER LUMP 6003 (3 axes) and FIBER LUMP 6003 MICRO (6 axes) detectors with dual-sensor technology detect lumps and neckdowns from a height of 5 µm, document their height, length, number and position, and connect to the FIBER ECOCONTROL processor system or to the line computer.

FIBER TENSION 6003 is a stand-alone add-on unit for fast and robust measurement of fibre tension with a measuring frequency of up to 50 kHz. It works on the birefringence principle, which takes the refractive properties of glass into account, and measures the bare fibre, both hot and cold, independently of the position of the fibre in the measuring field, the production speed and fibre vibration. It is installed upstream or downstream of cooling and allows direct tension control; it is used in particular for fibres processed into premium optical cables.

Optional equipment

  • FIBER LASER 6003 – fibre diameter measurement
  • FIBER LASER 6003 AIRLINE – diameter measurement with airline detection
  • FIBER LASER 6003 CCE – coating concentricity evaluation
  • FIBER TEMP 6003 – fibre temperature measurement (cold or hot end)
  • FIBER LUMP 6003 and FIBER LUMP 6003 MICRO – lump and neckdown detection
  • FIBER TENSION 6003 – fibre tension measurement
  • FIBER ECOCONTROL processor system
  • Profibus-DP or CANopen, EtherNet/IP, DeviceNet, Profinet IO industrial fieldbuses

More products in this category

Diameter and ovality measurement

SIKORA CENTERVIEW 8000

Non-contact measurement of eccentricity, wall thickness, diameter and ovality of cables
Diameter and ovality measurement

SIKORA CENTERVIEW PRO

Measurement of cable eccentricity and diameter in 4 axes with FFT analysis
Diameter and ovality measurement

SIKORA LASER PRO

Laser measuring heads for high-precision online diameter measurement in extrusion
Diameter and ovality measurement

SIKORA LASER Series 2000

Non-contact laser measurement of diameter and ovality of extruded products