SIKORA LUMP 2000

Detection of lumps and neckdowns on the surface of cables and wires at any line speed

Manufacturer
SIKORA

SIKORA LUMP 2000 are two-axis and three-axis lump and neckdown detectors with dual-sensor technology. They reliably detect defects on the surface of products with a diameter of 0.25–35 mm at line speeds of up to 3,000 m/min.

Benefits

  • Dual-sensor technology with a differential measuring principle
  • Infrared light sources – reliable detection even with contamination and extremely strong vibration
  • Defect analysis by type, size, length and position
  • Detection of lumps and neckdowns from 0.01 mm and from a length of 0.5 mm
  • Line speed up to 3,000 m/min
  • Digital display and storage of defect data
  • Two-axis (XY) and three-axis (T) versions
  • Three-axis models with 50 % greater coverage of the product surface, suitable for point defects
Applications:
  • Cables and wires
  • Products made of transparent materials (LUMP 2010 T)

We supply the equipment configured for your application. In your inquiry, please state the material processed, the required throughput and the line parameters – we will prepare a tailored quotation.

Go to inquiry

Need help choosing? Call us on +420 571 647 228 or write to info@azurr-tech.cz.

Technical data

Measuring principleDual-sensor technology (differential principle) with infrared light sources
Product diameter0.5–10 mm (LUMP 2010 XY), 0.5–25 mm (LUMP 2025 XY), 0.25–10 mm (LUMP 2010 T), 0.5–35 mm (LUMP 2035 T)
Min. detectable lump/neckdown0.01 mm
Min. defect length0.5 mm
Speed range1–3,000 m/min
Power supply100–240 V AC ±10 %, 50/60 Hz
Temperature range+5 to +50 °C
InterfaceRS485, RS232 (diagnostics); optionally analogue input for lump/neckdown tolerance or industrial fieldbus (Profinet IO, EtherNet/IP, Profibus-DP, CANopen, DeviceNet)
Dimensions (H × W × D)140 × 140 × 55 mm (LUMP 2010 XY), 258 × 218 × 70 mm (LUMP 2025 XY), 250 × 150 × 62.5 mm (LUMP 2010 T), 360 × 290 × 38.5 mm (LUMP 2035 T)

Description

The SIKORA LUMP 2000 instruments are based on dual-sensor technology, which detects irregularities on the product surface at any line speed. A powerful signal processor recognizes the height, depth and length of a defect, displays it digitally and stores the data. The combination of dual sensors (differential measuring principle) with infrared light sources allows reliable defect detection even under difficult conditions such as contamination or extremely strong vibration.

The two-axis LUMP 2000 XY detectors (LUMP 2010 XY and LUMP 2025 XY) are designed for products with diameters of 0.5–10 mm and 0.5–25 mm respectively. The three-axis LUMP 2000 T models (LUMP 2010 T and LUMP 2035 T) cover a 50 % larger part of the product surface and thus offer an even higher probability of catching lumps and neckdowns; they are therefore recommended in particular for detecting point defects.

All models detect defects from a length of 0.5 mm in a line speed range of 1–3,000 m/min. LUMP 2010 T is also available with identical parameters for transparent materials. For detecting lumps at diameters of 0.1–0.5 mm, SIKORA optical fibre measuring equipment is intended. ECOCONTROL series or REMOTE 6000 processor systems serve as display units.

Optional equipment

  • LUMP 2010 XY and LUMP 2025 XY – two-axis detectors
  • LUMP 2010 T and LUMP 2035 T – three-axis detectors
  • LUMP 2010 T for transparent materials
  • Analogue input for lump and neckdown tolerance
  • Profinet IO, EtherNet/IP, Profibus-DP, CANopen, DeviceNet industrial fieldbuses
  • ECOCONTROL series or REMOTE 6000 display units

More products in this category

Defect detection and spark testers

SIKORA SPARK (HF, AC, DC)

Spark testers for detecting faults and bare spots in the insulation of wires and cables
Defect detection and spark testers

SIKORA CAPACITANCE 2000

Cable capacitance measurement with FFT analysis, SRL prediction and bare spot detection