SIKORA CAPACITANCE 2000
Cable capacitance measurement with FFT analysis, SRL prediction and bare spot detection
SIKORA CAPACITANCE 2000 is a stand-alone measuring system for reliable measurement of the capacitance of cables and wires and for detecting bare spots. The multi-section Multi-Zone measuring electrode enables accurate measurement of average capacitance, FFT analysis and SRL prediction.
Benefits
- Self-adjusting stand-alone measuring system
- Multi-Zone multi-section measuring electrode – combination of a short (10 mm) and a long measuring zone
- Reliable capacitance measurement and bare spot detection
- Integrated FFT analysis and SRL prediction
- Accurate measurement of the average capacitance value in the long measuring zone
- Basis for CD-Control – control of capacitance and diameter by adjusting the cooling trough and line speed
- Three models for product diameters of 0.5–60 mm
- Measuring frequency 1,000 Hz, accuracy 0.15 % of measuring range
- Optional fast analogue outputs and industrial fieldbuses
- Cables and wires
- Data cables – prediction of high-frequency signal attenuation (SRL)
- Capacitance and diameter control on cable lines (CD-Control)
We supply the equipment configured for your application. In your inquiry, please state the material processed, the required throughput and the line parameters – we will prepare a tailored quotation.
Need help choosing? Call us on +420 571 647 228 or write to info@azurr-tech.cz.
Technical data
| Models | CAPACITANCE 2010, 2025, 2060 |
|---|---|
| Product diameter | 0.5–10 mm (2010); 1.0–25 mm (2025); 1.0–60 mm (2060) |
| Capacitance range | 0–300 pF/m (2010, 2025); 0–100 pF/m (2060); other ranges on request |
| Measuring frequency | 1 000 Hz |
| Accuracy | deviation 0.15 % of measuring range |
| Resolution | 14 bit (10 fF/m at 100 pF/m range, 30 fF/m at 300 pF/m range) |
| Active length | 125 mm (two measuring zones of 125 and 10 mm in length) |
| Interface | RS485, RS232 diagnostic interface |
| Optional interfaces | 2 fast analogue outputs 0–10 V; Profibus-DP, CANopen, DeviceNet, EtherNet/IP, Profinet IO |
| Power supply | 115 or 230 V AC ± 10 %, 50/60 Hz |
Description
SIKORA CAPACITANCE 2000 is a self-adjusting stand-alone system for capacitance measurement. High measurement quality is ensured by the combination of a short and a long measuring electrode (Multi-Zone technology), which are integrated into the measuring tube. The system is supplied in three models – CAPACITANCE 2010, 2025 and 2060 – for product diameters of 0.5–60 mm.
The short measuring electrode, 10 mm in length, captures periodic changes in capacitance with high spatial resolution using the fast Fourier transform (FFT). From the FFT data, the SRL (Structural Return Loss) is determined, which indicates the expected attenuation of the RF signal during data transmission. The long measuring zone measures the average capacitance value with high accuracy.
Accurate measured capacitance and diameter values are the basis for CD-Control (Capacitance/Diameter-Control). It ensures that both capacitance and diameter meet the requirements by automatically adjusting the cooling trough and controlling the line speed. Both influencing variables are controlled by the ECOCONTROL 6000 processor system.
DISPLAY 2000, REMOTE 6000 or ECOCONTROL series processor systems can be used to display the measured values. An RS485 interface and an RS232 diagnostic interface are available as standard; fast analogue outputs and industrial fieldbuses are optional.
Optional equipment
More products in this category
SIKORA SPARK (HF, AC, DC)
Spark testers for detecting faults and bare spots in the insulation of wires and cablesAll versions in the Defect detection and spark testers category (3 items)