SIKORA LM SMART

Laser Doppler measurement of product length and line speed

Manufacturer
SIKORA

SIKORA LM SMART is a non-contact length gauge based on the laser Doppler method that accurately determines the speed and produced length of the product. It works largely independently of the colour, surface quality and diameter of the product.

Benefits

  • Non-contact measurement of length and speed using the laser Doppler method
  • Measurement largely independent of the colour, surface quality and diameter of the product
  • Typical repeatability ±0.02 % and typical accuracy ±0.05 %
  • Speed range 2–2,400 m/min (various sensor types)
  • Working distance 120 mm with a tolerance of up to ±20 mm
  • Direction detection via an external signal
  • Laser class 3B, optionally laser class 1
  • Return on investment within a few months, even with a reduction in production length of just 0.1 %
Applications:
  • Cables and wires
  • Hoses and pipes
  • Measurement of produced length and line speed

We supply the equipment configured for your application. In your inquiry, please state the material processed, the required throughput and the line parameters – we will prepare a tailored quotation.

Go to inquiry

Need help choosing? Call us on +420 571 647 228 or write to info@azurr-tech.cz.

Technical data

Measuring principleLaser Doppler method
Speed range2–2,400 m/min (various sensor types)
Typical repeatability±0,02 %
Typical accuracy±0,05 %
Working distance120 mm
Working distance toleranceup to ±20 mm (±5 mm at full accuracy)
Direction detectionvia an external signal
Laserclass 3B (25 mW, 780 nm); optionally class 1
Interfacepulse output, industrial fieldbus (Profinet IO, EtherNet/IP, Profibus-DP)
Power supply (interface box)100–240 V AC ±10 %, 50/60 Hz
Dimensions (L × W × H)154 × 94 × 41 mm

Description

Length gauges ensure that the produced product length corresponds exactly to the requirement – both insufficient and excess length mean yield losses. If the production length is reduced by even just 0.1 %, according to the manufacturer the SIKORA LM SMART length gauge pays for itself within a few months.

LM SMART works on the proven laser Doppler method and therefore functions largely independently of the colour, surface quality and diameter of the product. Two laser beams strike the surface of the passing product, where they overlap and create a fringe pattern; from this the speed of the product, and thus the length passing in a given time, is determined precisely.

The unit operates as standard in laser class 3B; laser class 1 is optionally available. An optional comfort stand simplifies installation and adjustment, and an optional ECOCONTROL display unit clearly shows the produced length and line speed. The direction of movement is detected via an external signal from the system. The operation of class 3B laser equipment (classification according to IEC 60825-1) is subject to special requirements.

Standards and test methods

  • IEC 60825-1 (classification of class 3B laser equipment)

Optional equipment

  • Laser class 1
  • Comfort stand for easy installation and adjustment
  • ECOCONTROL display unit for showing produced length and line speed
  • Various sensor types depending on the speed range

More products in this category

Temperature, length and preheating

SIKORA PREHEATER 6000 TC

Conductor preheater with non-contact conductor temperature measurement and control
Temperature, length and preheating

SIKORA ULTRATEMP 6000

Ultrasonic measurement of PE melt temperature between the extruder and the crosshead