PREMOSYS QuickMatch II

Inline measurement of colour and transmittance (transmission) of liquid plastics and recyclates during extrusion

Manufacturer
PREMOSYS

QuickMatch II is a PREMOSYS system for measuring colour and transmittance (transmission) of liquid plastics and recyclates directly in the production line (inline). Thanks to its long-term stability, it measures colour and transmission independently of surface quality and the reflective properties of the plastic, and is used for quality control and process control in the extrusion of recyclates.

Benefits

  • Inline measurement of colour and transmittance (transmission) of liquid plastics and recyclates
  • Measurement independent of surface quality and the reflective properties of the plastic
  • Long-term stable measurement
  • Both transmission and reflection measuring geometries
  • Outputs CIE 1976 L*a*b*, XYZ and yellowness index (YI E313, YI D1925)
  • 11 gain levels with 16-bit resolution
  • White LED with a luminous flux of approx. 50 lm
  • Connection via light guide with F-SMA connector
  • Parameterization and triggering via Fast Ethernet
  • SDK available
Applications:
  • Quality control and process control in the extrusion of recyclates
  • Measurement of colour and transmittance of plastic melt
  • Optimization of extrusion processes and recycling systems
  • Production of high-quality products with a higher recyclate content

We supply the equipment configured for your application. In your inquiry, please state the material processed, the required throughput and the line parameters – we will prepare a tailored quotation.

Go to inquiry

Need help choosing? Call us on +420 571 647 228 or write to info@azurr-tech.cz.

Technical data

Measuring geometrytransmission, reflection
Spectral range380–780 nm
Output valuesCIE 1976 L*a*b*, tristimulus values X, Y, Z, yellowness index (YI E313, YI D1925)
Resolution11 gain levels, 16 bits
Light sourcewhite LED, total useful luminous flux approx. 50 lm
Power supply100–240 V AC, 50/60 Hz
Electrical connectionpluggable terminal block
InterfaceFast Ethernet RJ45, proprietary protocol
Parameterization and triggeringvia the Ethernet interface
Connection to the measured objectlight guide with F-SMA connector
Dimensions (W × H × D)465 × 500 × 160 mm
Noise levelmax. 63 dB(A)
Protection4 A fuse
Ingress protectionIP34
Operating temperature10–55 °C
Operating humidity35–85 % relative humidity
Storage temperature-30 to 70 °C
Weightapprox. 13.2 kg

Downloads

Description

QuickMatch II is an innovative PREMOSYS system for colour measurement directly in the production line (inline), specially optimized for measuring the transmittance (transmission) of liquid plastics and recyclates. It is used for quality control and process control in the extrusion of recyclates and helps to optimize extrusion processes and recycling systems.

Thanks to its long-term stability, it enables precise measurement of colour and transmission independently of surface quality and the reflective properties of the plastic. It operates over a spectral range of 380–780 nm in both transmission and reflection geometry and provides CIE 1976 L*a*b* values, tristimulus values X, Y, Z and the yellowness index (YI E313, YI D1925).

QuickMatch II helps to produce high-quality products from recycled materials and supports sustainability through a higher recyclate content. The system, measuring 465 × 500 × 160 mm, is powered by 100–240 V AC, connects to the measuring point via a light guide with an F-SMA connector and is parameterized and triggered via Fast Ethernet. An SDK is available for custom applications.

Optional equipment

  • SDK for custom applications

More products in this category

Colour and transmission measurement

PREMOSYS QuickMatch I

Inline reflectance colour measurement for liquid, molten and powder media, for example plastic melt
Colour and transmission measurement

PREMOSYS PR0128 CIELab Color Sensor

Compact CIELab colour sensor with integrated high-power light source and memory for 63 products