PREMOSYS Compact Color Analyzer (CCA)
Compact industrial colour sensor with OPC UA interface and Power over Ethernet (PoE) supply
The Compact Color Analyzer (CCA) is a compact industrial colour sensor for precise colour measurement of colour-critical products directly in the production line (inline). It measures in the XYZ, CIELab and CIELCh colour spaces, evaluates colour deviations including ΔE00 and passes the results to higher-level systems via OPC UA or Modbus UDP/IP.
Benefits
- Precise colour measurement in the XYZ, CIELab and CIELCh colour spaces over a spectral range of 380–780 nm
- Evaluation of colour differences ΔE*ab, ΔL*, Δa*, Δb*, ΔC*ab, ΔH*ab and ΔE00 (CIEDE2000)
- Adjustable limit values and OK/NOK result
- Broadband light source (white LED) for capturing subtle colour nuances
- Integrated OPC UA server and Modbus UDP/IP protocol
- Power supply via Power over Ethernet (PoE) according to IEEE 802.3af or from an external 12–28 V DC supply
- Measuring time approx. 1.2 ms without averaging, averaging of 1 to 1,024 measurements
- Six gain levels with 16-bit resolution and automatic gain control
- 64 product profiles and 64 user calibrations
- Stray light compensation, normalization and object detection mode
- External measurement triggering (from firmware 2.1.1)
- Intuitive commissioning and operating software, SDK available
- Automated quality control of colour-critical products
- Colour measurement directly in the production line (inline)
- Detection of colour deviations caused by material changes, defective coatings or process fluctuations
- Automated inspection tasks with measurement data transfer to higher-level systems
We supply the equipment configured for your application. In your inquiry, please state the material processed, the required throughput and the line parameters – we will prepare a tailored quotation.
Need help choosing? Call us on +420 571 647 228 or write to info@azurr-tech.cz.
Technical data
| Spectral range | 380–780 nm |
|---|---|
| Calibration (standard illuminant / observer) | D65/10°, other calibrations on request |
| Output values | XYZ, CIELab (L*, a*, b*), CIELCh (L*, C*ab, hab), ΔE*ab, ΔL*, Δa*, Δb*, Δab*, ΔC*ab, Δhab, ΔH*ab, ΔE00 |
| Resolution | 6 gain levels, 16 bits |
| Light source | white LED |
| Measuring time | approx. 1.2 ms without averaging; averaging 1–1,024 measurements (max. approx. 1.23 s) |
| Number of products | 64 (up to 16 binary-coded via 4 outputs) |
| Power supply | PoE according to IEEE 802.3af; optionally 12–28 V DC from an external power supply, max. 200 mA at 24 V |
| Analogue output | active current output 4–20 mA, resolution < 7 µA, load ≤ 220 Ω (PoE) / ≤ 800 Ω (24 V) |
| Product outputs | 4× high-side switch (PNP), max. 150 mA per output, max. 300 mA in total; cannot be used with PoE power supply |
| Communication protocols | OPC UA, Modbus UDP/IP, others on request |
| Interface | Ethernet 10Base-T (IEEE 802.3i) / 100Base-T (IEEE 802.3u), IPv4 |
| Connection to the measured object | light guide with F-SMA connector |
| Housing material | surface-treated aluminium |
| Ingress protection | IP20 |
| Operating temperature | 10–50 °C |
| Operating humidity | 35–85 % relative humidity |
| Storage temperature | -10 to 60 °C |
| Weight | approx. 300 g |
Downloads
- Datasheet (EN) PDF
Description
The Compact Color Analyzer (CCA) from PREMOSYS is a colour sensor designed for automated quality control of colour-critical products. It distinguishes the finest differences in hue, saturation and lightness and, thanks to its broadband light source, captures even very subtle colour nuances. It measures over a spectral range of 380–780 nm with calibration for the D65/10° standard illuminant and observer.
The sensor measures colour in the XYZ, CIELab and CIELCh colour spaces. Limit values can be set for individual colour differences; on this basis the sensor evaluates whether the measured colour is within tolerance and outputs an OK/NOK result. In addition to the usual colour differences in the CIELab and CIELCh spaces, it also supports the CIEDE2000 formula (ΔE00), which takes into account the different sensitivity of the human eye to changes in lightness, chroma and hue.
For integration into automation, the CCA has an integrated OPC UA server and supports the Modbus UDP/IP protocol; it connects to the network via 10Base-T/100Base-T Ethernet. Via OPC UA, the current XYZ, CIELab and CIELCh values, the sensor temperature and saturation, the gain level and the light source output can be read, and selected settings can be changed. The sensor can be powered via Power over Ethernet (PoE) according to IEEE 802.3af, so that communication and power run over a single cable. Alternatively, a combined power and input/output interface (12–28 V DC) is available with four product outputs and a 4–20 mA analogue current output; from firmware version 2.1.1, measurements can also be triggered via an external input.
According to the user manual, a single measurement without averaging takes approximately 1.2 ms. Averaging can be set in the range of 1 to 1,024 measurements – higher averaging reduces noise and short-term fluctuations but lengthens the measuring time (to approximately 1.23 s at maximum averaging). The sensor can thus be adapted either to short process cycles or to tasks with high stability requirements. Six manually selectable gain levels and automatic gain control are available.
The CCA stores 64 product profiles and 64 user calibrations, and each profile can be assigned its own calibration. Stray light compensation and normalization support reproducible results under defined measuring conditions, and the object detection mode outputs a result only when the object is actually within the valid measuring range. Intuitive software simplifies commissioning and routine operation; an SDK is available for custom applications.
Optional equipment
More products in this category
PREMOSYS PR0128 CIELab Color Sensor
Compact CIELab colour sensor with integrated high-power light source and memory for 63 productsPREMOSYS PR0086-S CIELab Color Checker
Inline colour measurement in CIELab for inhomogeneous surfaces and bulk materials, for example pelletsPREMOSYS QuickMatch I
Inline reflectance colour measurement for liquid, molten and powder media, for example plastic meltPREMOSYS QuickMatch II
Inline measurement of colour and transmittance (transmission) of liquid plastics and recyclates during extrusionPREMOSYS PR0120 Opacity and Color Analyzer
High-speed measurement of colour in CIELab, transmittance (transmission) and opacity of filmsAll versions in the Colour and transmission measurement category (8 items)