PREMOSYS PR0128 CIELab Color Sensor
Compact CIELab colour sensor with integrated high-power light source and memory for 63 products
The PR0128 is a compact PREMOSYS colour sensor with an integrated high-power light source for determining surface colour, colour measurement and presence detection, even with transparent products. It evaluates colour in CIE 1976 L*a*b*, manages up to 63 products and offers a MARKS mode for fast detection of colour marks.
Benefits
- Integrated high-power light source (white LED) for determining surface colour
- Outputs CIE 1976 L*a*b*, XYZ and Delta E
- Colour resolution < 0.10 ΔE, repeatability < 0.50 ΔE
- Up to 63 products can be taught independently of gain
- MARKS mode for the fastest possible detection of colour marks
- Automatic gain adjustment and optional averaging
- Adjustable hold time of the digital outputs
- Multilingual software, user calibration and automatic ΔE calculation
- Colour calibration with unit-to-unit consistency < 1 %
- Six PNP outputs, Teach and product selection inputs, RS232 interface
- SDK available
- Determination of surface colour
- Colour measurement and presence detection of transparent products, for example adhesives
- Detection of colour marks
- Fast inspection tasks with short process cycles
We supply the equipment configured for your application. In your inquiry, please state the material processed, the required throughput and the line parameters – we will prepare a tailored quotation.
Need help choosing? Call us on +420 571 647 228 or write to info@azurr-tech.cz.
Technical data
| Spectral range | 380–780 nm |
|---|---|
| Output values | CIE 1976 L*a*b*, tristimulus values X, Y, Z, Delta E |
| Resolution | 8 gain levels, 12 bits |
| Light source | white LED |
| Number of products | up to 63, binary-coded via 6 outputs |
| Colour resolution | < 0,10 ΔE |
| Repeatability | < 0,50 ΔE |
| Inputs | Teach, In 1–In 3; on 12–27 V DC, off < 2 V |
| Outputs | Out 1–Out 6, high-side switches (PNP), max. 70 mA per output |
| Interface | RS232, proprietary protocol, parameterization via the serial interface |
| Power supply | 12–27 V DC, max. 50 mA at 24 V |
| Connection to the measured object | light guide with F-SMA connector |
| Housing material | surface-treated aluminium |
| Ingress protection | IP54 |
| Operating temperature | 10–50 °C |
| Operating humidity | 35–85 % relative humidity |
| Storage temperature | -10 to 60 °C |
| Weight | approx. 200 g |
Downloads
- Datasheet (EN) PDF
Description
The CIELab Color Sensor PR0128 from PREMOSYS is a colour detection system with an integrated high-power light source, designed for determining surface colour. It is also suitable for colour measurement and presence detection of transparent products, for example adhesives. It operates over a spectral range of 380–780 nm and provides its results as CIE 1976 L*a*b* values, tristimulus values X, Y, Z and Delta E.
The colour resolution is < 0.10 ΔE and the repeatability < 0.50 ΔE. The sensor has eight gain levels with 12-bit resolution; in applications with varying brightness levels, the gain can be adjusted automatically. The averaging setting makes it possible to balance lower signal noise against a shorter response time. Up to 63 products can be taught independently of gain; the detection results are passed directly via digital outputs, binary-coded via six outputs.
For particularly fast tasks, the PR0128 offers the MARKS operating mode, in which the sensor settings are automatically optimized for the shortest possible measuring time and thus the highest possible measuring frequency – this mode is intended for detecting colour marks. An adjustable hold time ensures that the higher-level control system reliably captures even fast changes in the states of the digital outputs.
Configuration is simplified by multilingual software with user calibration and automatic ΔE calculation; the colour calibration ensures unit-to-unit consistency of < 1 %. The sensor is parameterized via RS232, has inputs for teaching (Teach) and product selection, an aluminium housing with IP54 ingress protection and a light guide connection with an F-SMA connector. An SDK is available.
Optional equipment
More products in this category
PREMOSYS Compact Color Analyzer (CCA)
Compact industrial colour sensor with OPC UA interface and Power over Ethernet (PoE) supplyPREMOSYS PR0086-S CIELab Color Checker
Inline colour measurement in CIELab for inhomogeneous surfaces and bulk materials, for example pelletsPREMOSYS PR0120 Opacity and Color Analyzer
High-speed measurement of colour in CIELab, transmittance (transmission) and opacity of filmsPREMOSYS QuickMatch I
Inline reflectance colour measurement for liquid, molten and powder media, for example plastic meltPREMOSYS QuickMatch II
Inline measurement of colour and transmittance (transmission) of liquid plastics and recyclates during extrusionAll versions in the Colour and transmission measurement category (8 items)