SIKORA X-RAY 8000 ADVANCED/NXT

X-ray measurement of wall thickness and eccentricity of cables on CV lines

Manufacturer
SIKORA

SIKORA X-RAY 8000 ADVANCED/NXT is an X-ray measuring system for CV (continuous vulcanization) lines that measures the diameter, wall thickness and eccentricity of medium-voltage, high-voltage and extra-high-voltage cables. It enables fast centring of the crosshead and process control.

Benefits

  • Eight-point display of wall thickness and concentricity for three insulation layers
  • XLL (eXtra Long Life) X-ray tubes for long operating life with high accuracy and reliability
  • Ceramic windows and NTX (Non Toxic X-ray) windows for operation throughout the service life without cleaning
  • Optimized Multi-Sensor-Technology (MST) – accurate measurement even with cable vibration
  • Fast centring of the crosshead and optimum quality and process control
  • Measured values immediately after line start-up, with no calibration and no warm-up
  • X-RAY 8000 ADVANCED: up to ten times faster acquisition of measured data immediately after line start-up for instant control
  • X-RAY 8000 ADVANCED: optimization of the line start-up process
  • High cable quality with maximum material and cost savings
  • Dual safety system – the X-ray can only be switched on when operator safety is ensured
Applications:
  • Medium-voltage, high-voltage and extra-high-voltage cables
  • CCV and VCV lines operating with nitrogen and/or steam
  • MDCV lines (X-RAY 8700 NXT)
  • Straight sector cables on CCV lines (special version)
  • XLPE, EPR, EPDM, PP insulation (others on request)

We supply the equipment configured for your application. In your inquiry, please state the material processed, the required throughput and the line parameters – we will prepare a tailored quotation.

Go to inquiry

Need help choosing? Call us on +420 571 647 228 or write to info@azurr-tech.cz.

Technical data

ApplicationCCV and VCV lines operating with nitrogen and/or steam
Products measuredMedium-voltage, high-voltage and extra-high-voltage cables with XLPE, EPR, EPDM or PP insulation (others on request)
Product diameter – CCV linesX-RAY 8000 ADVANCED/NXT: 10–92 mm, 10–130 mm or 10–168 mm
Product diameter – VCV linesX-RAY 8000 ADVANCED/NXT: 10–140 mm or 10–205 mm
Product diameter – X-RAY 8700 NXT10–94 mm, 10–145 mm or 10–180 mm (at the end of CCV, VCV, MDCV lines)
Accuracydiameter ±5 µm ±0.02 %
Repeatabilitydiameter ±3.0 µm ±0.02 %; wall thickness ±7.5 µm ±0.02 %
Scanning speedup to 40 mm/s
Radiation safetydual safety system; radiation in the immediate vicinity of the scanner below the limits of all international regulations
Permissible temperature+5 to +50 °C
Cooling water – consumptionapprox. 70–150 l/h at max. 30 °C
Scanner dimensionsapprox. 950 × 900 × 270 mm

Description

SIKORA X-RAY 8000 ADVANCED/NXT is an X-ray measuring system for cable quality control on CV (continuous vulcanization) lines. These lines produce cables for demanding applications where absolute reliability is required. Measurement reliability is ensured by the combination of X-ray technology with Multi-Sensor-Technology (MST), analytical evaluation and ceramic windows.

The X-RAY 8000 NXT version combines Multi-Sensor-Technology (MST) with two high-speed scanners and ensures accurate and reliable measurement of medium-voltage, high-voltage and extra-high-voltage cables even when the cable is vibrating. Thanks to MST, each scan of the two scanners provides four measured values.

X-RAY 8000 ADVANCED with High Speed Technology (HST) is an advanced alternative to the X-RAY 8000 NXT system, adapted to the requirements of Industry 4.0. The system with 16 measuring sensors measures diameter, wall thickness and eccentricity up to ten times faster than the X-RAY 8000 NXT. Every change to the centring screw settings is recorded and displayed immediately, and four times as many measuring points as the NXT system allow measurement with almost no delay and instant control. For rapid data updates, the system automatically adapts the scan path to the cable diameter.

For measuring the wall thickness, concentricity, diameter and ovality of high-voltage cables on MDCV lines, SIKORA recommends the X-RAY 8700 NXT model, which is installed at the end of CCV, VCV and MDCV lines and provides cable parameter values measured in the cold state. It is suitable for all types of cables with solid, stranded or Milliken conductors and with single-layer, double-layer or triple-layer insulation. All systems in the series are equipped with XLL (eXtra Long Life) X-ray tubes; a special version for measuring straight sector cables on CCV lines is optionally available.

Optional equipment

  • X-RAY 8000 NXT with Multi-Sensor-Technology (MST)
  • X-RAY 8000 ADVANCED with High Speed Technology (HST) and 16 measuring sensors
  • X-RAY 8700 NXT for measurement at the end of CCV, VCV and MDCV lines
  • Special version for measuring straight sector cables on CCV lines
  • ECOCONTROL series display and operating units

More products in this category

Wall thickness measurement

SIKORA CENTERWAVE 6000

Millimetre-wave measurement of diameter, ovality and wall thickness of large pipes
Wall thickness measurement

SIKORA PLANOWAVE 6000

Online thickness measurement of plastic sheet using millimetre-wave technology