SIKORA CENTERWAVE 6000
Millimetre-wave measurement of diameter, ovality and wall thickness of large pipes
SIKORA CENTERWAVE 6000 uses millimetre-wave technology to measure, without contact, the diameter, ovality and wall thickness of plastic pipes with diameters of 32–1,600 mm around the entire circumference. It requires no knowledge of material properties, no coupling medium and no calibration.
Benefits
- Non-contact measurement using millimetre-wave technology (FMCW)
- Measurement of outer diameter, ovality and wall thickness around the entire circumference without knowledge of material properties
- Measurement of the thickness of individual layers of multilayer pipes
- Independent of coupling media and material temperature – measurement possible even in the hot zone of the line
- No calibration, maintenance-free and robust design
- Measured values available for display and control within a few milliseconds
- Calculation of virtual measured values at the extruder for fast wall thickness control
- Reduction of excess material consumption
- Display on the ECOCONTROL 6000 industrial PC with trend and statistical data
- Extrusion lines for large plastic pipes
- Smooth-wall pipes
- Foam-core pipes
- Multilayer pipes
- Plastics (e.g. PE, HDPE, PP, PA6, PVC), ceramics, glass
We supply the equipment configured for your application. In your inquiry, please state the material processed, the required throughput and the line parameters – we will prepare a tailored quotation.
Need help choosing? Call us on +420 571 647 228 or write to info@azurr-tech.cz.
Technical data
| Measuring principle | Non-contact, FMCW (Frequency Modulated Continuous Wave) millimetre-wave technology |
|---|---|
| Measuring range (diameter) | 6000/250: 32–250 mm; 6000/400: 75–400 mm (optionally 60–400 mm); 6000/630: 75–630 mm; 6000/800: 160–800 mm; 6000/1200: 250–1,200 mm; 6000/1600: 250–1,600 mm |
| Wall thickness | 6000/250: >1.6 mm; 6000/400: 3.8 mm (>1.6 mm); other models: 3.8 mm; smaller thicknesses on request |
| Repeatability | 6000/250: 1 µm; 6000/400: 5 µm (1 µm); other models: 5 µm |
| Accuracy | 6000/250: 10 µm; 6000/400: 50 µm (10 µm); other models: 50 µm |
| Calibration | not required |
| Measuring signal frequency | 80–300 GHz |
| Measuring speed | 370 Hz |
| Power supply | 200–240 V (100–460 V) AC ±10 %, 50/60 Hz; 6000/250: 115 V (100–125 V) or 230 V (220–240 V), 50/60 Hz ±10 % |
| Ambient temperature | +5 to +45 °C |
| Interface | RS232, USB; optionally CANopen, EtherNet/IP, DeviceNet, Profinet IO, Profibus-DP, LAN (Ethernet), OPC DA/UA |
Description
SIKORA CENTERWAVE 6000 measures the outer dimensions and wall thickness of extruded pipes around the entire circumference, without knowledge of the properties of the materials processed or their temperature. The system is designed for large-pipe extrusion lines and can be installed at various positions along the production line, including the hot zone, because it needs no coupling medium, temperature is not critical and no calibration is required.
One or more sensors – so-called transceivers – distributed around the circumference of the pipe continuously transmit and receive frequency-modulated millimetre waves (FMCW). The waves are reflected at the layer interfaces, the receiving unit of the transceiver detects and demodulates them, and the received signals carry information on the distances between the interfaces of the different materials. After algorithmic processing, the diameter, ovality and wall thickness values are available for display and control within a few milliseconds. The system determines the characteristic material values by itself, so no material parameters need to be entered.
Millimetre-wave technology is suitable for all types of plastic pipes – smooth-wall pipes, foam-core pipes and multilayer pipes, for which it also measures the thickness of the individual layers. It enables accurate measurement of diameter, ovality, wall thickness and wall sag in the production of large plastic pipes. The aim of the development was a non-contact measuring device for pipe extrusion that is maintenance-free and robust.
The ECOCONTROL 6000 industrial PC displays the measured values numerically and graphically and offers extensive trend and statistical functions. Calculating virtual measured values at the extruder allows the operator to react quickly to changes; even with a long delay between the extrusion point and the measuring point, the wall thickness can thus be controlled effectively and quickly and excess material consumption reduced.
Optional equipment
More products in this category
SIKORA X-RAY 6000 (PRO, PURE, C-PIPE AI)
X-ray measurement of diameter, ovality, wall thickness and concentricitySIKORA X-RAY 8000 ADVANCED/NXT
X-ray measurement of wall thickness and eccentricity of cables on CV linesAll versions in the Wall thickness measurement category (4 items)